GN800
Description
The GN800 is a High Speed Form/Cut/Stack Thermoformer, the first GN model that offers movable top and bottom platens. In partnership with an experienced Italian machine manufacturer, GN is re-introducing to the market a Form/Cut/Stack Thermoformer that was manufactured and distributed worldwide for many years. With the input of customers and toolmakers, the enhanced GN800 will continue to service the production requirements of companies around the world.
Main Features:
- Forming 150mm (5.9") above and below sheet line
- High efficiency heaters
- Increased tonnage in both forming and cutting stations
- In-mould-cut capability
- Optional stacking systems
- Optional punching station
- Multi-purpose thermoformer for food, medical, industrial and other special applications
Optional Equipment:
- Material pre-heating system
- Motorized material unwind unit (required when no pre-heater is used)
GN Tooling:
- Cost effective tooling is designed, manufactured and production tested at our facility
Specifications
| Forming Area | 830mm x 570mm (32.6" x 22.4") |
| Depth of Draw | 150mm (5.9") |
| Clamping and Cutting Force | 75 Ton |
| Sheet Width | 910mm (35.8") |
| Material Thickness Range | 0.25mm - 2.00mm (0.010" - 0.080") |
| Material Roll Diameter | 1.2m (47") |
| Main Supply Voltage | 3 Phase+N+PE, 50-60Hz (380-480) 225 Amps |
| Running Power Consumption | 42 Kva (Approximate) |
| Air Pressure | 6.2 bar (90 PSI) / 9.6 bar (140 PSI) (Minimum / Maximum) |
| Cooling Water Consumption | 65 - 200 litres/min (17 - 53 gallons/min) |
| Machine Dimensions (l x w x h) |
14840mm x 3500mm x 3300mm (48'9" x 11'6" x 10'10") |
